
Still, other problems may be going on with your valve or solenoid.

Simply flushing them out can solve quite a few problems with sprinkler heads. Often times, a bit of sand or debris will get stuck inside the ports, or the small holes, inside the valve.
#Rain bird red alarm light professional
If that isn’t the problem, your sprinkler professional will move on to look inside of the valve and find out if it is in good working order or needs to be cleaned out or replaced. Either way, if it gets stuck, it needs to be replaced. The spring-loaded plunger may pop out, or you may need to push on it to get it to pop up. When you get to the valve, you can just unscrew it counterclockwise. If you try to do this yourself, turn off the power and the water to the sprinkler head before you start. They can check on the solenoid by opening up the sprinkler valve.

If your electrical is fine, your sprinkler technician will look for mechanical issues with the valve and the solenoid. We don’t suggest that you try to do electrical work yourself, as it can be dangerous, especially on sprinkler heads as there is water right nearby. If it’s getting the wrong signal, then the circuitry needs to be replaced. Typically, the first step is to check the electrical signal to the solenoid. That’s why you need a professional to check on the solenoid itself. With low pressure from the valve solenoid, you’ll find that brown spots will develop on your lawn, as the water won’t get as far as it is supposed to, and the gaps in coverage will make your lawn uneven.Īll of the problems listed above can be caused by things other than the valve solenoid.
#Rain bird red alarm light how to
Here’s how to tell if a sprinkler valve solenoid is bad and what to do about it if it is. Unfortunately, they go bad frequently, often due to debris. So, the sprinkler valve solenoid is a critical part of the sprinkler system.

Pressure determines how much water comes out of the sprinkler head and how far it goes. Sprinkler controllers send out electrical systems to the valve solenoid,which then allows only enough water through the valve to create the right pressure. A sprinkler valve solenoid is the part of the sprinkler that controls water pressure in the system.
